It's The Complete Cheat Sheet On Electric Fireplace Wall Hanging
Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are ready to use straight from the box. These electric fireplaces are a great way of adding ambiance to your home without the need to remodel or venting.
They are usually heavy and require careful installation. Follow these steps to install your new electric fire in the correct way.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly improves the look of any room. It's a perfect solution for homes that don't have an existing fireplace opening or apartment residents.
The first step is to decide where you'll install your new electric fire. It is important to choose the ideal location that isn't susceptible to moisture and at a minimum of just a few inches from drapes, furniture, and high traffic areas. Once you've located a location you like, mark the wall with layout marks for the top and bottom plates of the fireplace frame.
Use a drill or similar tool to make exploratory holes in the wall. Check for studs using a stud-detector. Mark the drywall with the location of the fireplace mounting brackets. Next, patch and paint the drywall or create a wall to prepare it for the fireplace installation.
Depending on electric fires wall mounted chosen wall-mounted fire, you might be required to install the screen and firebox as one unit or separate them by the use of a wall bracket. If you are unsure of your ability to finish this project you can hire a general contractor or an experienced carpenter.
The majority of electric fireplaces come with a template for the installation procedure, but you must also have an emery board and a pencil in hand to accurately mark the spot in which you'll mount the wall brackets. Before drilling, make use of the template to check that the fireplace's power cable can reach from the installation site to an outlet near by to plug it in.
Once the studs and fireplace frame are in place, you can put in drywall that is as smooth and flush as you can for a sleek appearance. Trim the bottom edge and paint, sand and then finish the frame.
Most wall-mounted electric fireplaces have slots or hooks on the back of the unit, which you insert into slots or hooks on the mounting brackets. Be sure to align the hooks or slots prior to connecting the brackets for your fire. Once the fire is installed you can then add additional elements like driftwood logs crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above a fireplace, mantel or chimney breast is the ideal spot for hanging artwork. There is a delicate balance between an artistic arrangement and one that does not detract from the overall look of the fireplace.
Generally, the rule of thumb is that a picture should be at least 80% the size of the mantel or firebox it sits above. This will allow it remain proportionate and appear attractive on the wall. Other ornaments & decorative items placed on the mantel may influence the size and proportional guideline.
If you are planning to hang a photograph over your electric fire the frame must be made of glass or a material that can handle high temperatures. If you're not sure whether the frame is suitable, you can test the frame with a heat sensitive cloth to see if it is suitable for this purpose.
One of the most common concerns when displaying pictures above an open flame is the risk of causing damage to the artwork from smoke or stray heat. This is not a problem with gas or wood-powered fireplace. However, if you plan to install an electric wall-mounted fire it is essential to follow the instructions provided by the manufacturer.
The majority of electrical fires have a mounting bracket which can be attached to the wall by hanging screws or wall-mounted fixing systems. If the latter option is used, it is recommended that you drill exploratory holes into an isolated area of the wall before you begin to install your electric fire. You can then make use of a cable and pipe locater to ensure that there aren't any pipes or cables near the mounting position.
If so, you could place your fire on the electrical socket or move it to another spot. If you decide to move it, make sure that the power cable is able to reach the electrical socket. This is crucial for older homes or homes with solid walls. If you don't do this, the electric fireplace won't function correctly. Some models have a template included that shows you where to drill holes to make the holes and others require a spirit level and pencil to mark the correct locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electric fireplace, you may have to move the plug socket away from the wall to behind the fireplace. This can give it a cleaner appearance. Be sure to test the fireplace before you do this to ensure that everything works just as it should.
The third way to mount an electric fireplace is framing the space and building it into the wall. This gives a finished traditional look and also allows you to add a mantel. The owner's manual for your model will provide details on framing, wiring, and the best way to secure the fire place.
The position of your new electric fireplace on the wall with the help of a pencil or marker. Then apply a carpenter's level to ensure that the installation location is flat and level. You can use a studfinder mark the location to can be sure you're drilling in a secure area.
Use the electric drill after having marked the installation area to make holes for bracket screws or hanging screws. Follow the steps in the owner's manual for this step. This is particularly important if you are installing the fireplace into drywall. If you're not sure the best way to go about this, you can always ask a professional to do the installation for you.
You can also hide power cords from view using a cable organizer kit. electric fires wall mounted come with clips, sleeves or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you don't want to cut into your wall, you can install a power bridge kit for more secure and cleaner connections.
You can also camouflage cords by using paintable wire covers or by tacking them to the wall. Be sure to keep the cover or tacks away from the source of heat, however. This will shield the cord from damage and also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fireplace is a fantastic alternative for home renovations or for those who do not have the space or the money to build a gas fireplace. They are easy-to-hang and are ready to use straight out of the box. They're a great alternative to those looking for an elegant, modern design or warmth from a fire. They are designed to be hung like art on any wall, can be recessed or not recessed at all and are fully electric with heating that is powered by a fan.
Before beginning the actual installation process it's a good idea to take stock of all the tools and equipment you will need. You can find the complete instructions on how to mount an electric fire in the user manual. Certain models require you to screw brackets directly into the wall while others could have mounting plates that slide into slots or hooks onto the brackets. If you're installing a recessed unit, it's important to ensure that all combustible materials are taken from the area of installation. As a rule of thumb the materials should be kept 3 feet from the front of the fireplace and 1.5 feet away from its sides.
After you have checked all parts after that, plug in your electric fireplace and verify that it's working. This is an essential step as it will ensure that the flame effect screen and heater function according to the specifications. This will give you a good idea of the final product's final state.
Cover the cord when you are satisfied that it's functioning properly. This will help to keep the final product neat and tidy. This can be accomplished by applying paintable wire covers, or install an outlet that allows you to place the cord behind the unit. This will give an elegant finish to your fireplace.